Models 5-22 / 5-26 19 G/G-A
Single roll clamps - Unsplit long arm |
5-2219G-11A | 2000 | 575 | 250-1150 | 820 | 560 | 245 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2219G-11 | 2000 | 575 | 400-1150 | 820 | 555 | 245 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2219G-13A | 1900 | 650 | 250-1300 | 820 | 570.4 | 260 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2219G-13 | 1900 | 650 | 450-1300 | 820 | 565 | 260 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2219G-14A | 1600 | 725 | 250-1450 | 820 | 590 | 275 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2219G-14 | 1600 | 725 | 500-1450 | 820 | 585 | 275 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2219G-15A | 1500 | 760 | 250-1520 | 820 | 615 | 291 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2219G-15 | 1500 | 760 | 500-1520 | 820 | 610 | 291 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
1 - 2 roll clamps - Split long arm |
5-2619G-11A | 2000 | 575 | 250-1150 | 820 | 550 | 225 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2619G-11 | 2000 | 575 | 400-1150 | 820 | 545 | 225 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2619G-13A | 1900 | 650 | 250-1300 | 820 | 560.4 | 240 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2619G-13 | 1900 | 650 | 450-1300 | 820 | 555 | 240 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2619G-14A | 1600 | 725 | 250-1450 | 820 | 580 | 255 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2619G-14 | 1600 | 725 | 500-1450 | 820 | 575 | 255 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2619G-15A | 1500 | 760 | 250-1520 | 820 | 605 | 271 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2619G-15 | 1500 | 760 | 500-1520 | 820 | 600 | 271 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
Notes:
- Two hydraulic functions required.
- Adjustable pressure relief valve is included.
- Short arm: adjustable at 45-degree rotation.
- Models 5-xxxx-xx with fixed (non-moving) short arm.
- Models 5-xxxx-xx-A with hydraulically positionable short arm.
- See hydraulic specifications page for pressure and flow rate recommendations.
- Standard contact pads: metal grain pattern with high-friction surface.
- Minimum 3,5-degree forward tilt on lift mast is required for horizontal handling.
Options:
- Special roll ranges.
- Models with “A” have a moveable short arm
- Contact pad options:
- - steel-sprayed
- - rubber faced
- - polyurethane faced.