Models 321PA-SG (Sideshifting)
321PA30A-56SG-3A | 3000 | 600 | 4,0/500 | 1470 | 100 | 560-2.230 | 1.350 | 60x50 | 510 | 1150 | 50 | 172 | 220 | 755 | 3A |
321PA30B-56SG-3A | 3000 | 600 | 4,0/500 | 1570 | 100 | 560-2.330 | 1350 | 60x50 | 510 | 1150 | 50 | 172 | 215 | 775 | 3A |
321PA30C-56SG-3A | 3000 | 600 | 4,0/500 | 1670 | 100 | 560-2.430 | 1350 | 60x50 | 510 | 1150 | 50 | 172 | 213 | 795 | 3A |
321PA30D-56SG-3A | 3000 | 600 | 4,0/500 | 1770 | 100 | 560-2.530 | 1350 | 60x50 | 510 | 1150 | 50 | 172 | 211 | 815 | 3A |
321PA30E-56SG-3A | 3000 | 600 | 4,0/500 | 1970 | 100 | 560-2.730 | 1350 | 60x50 | 510 | 1150 | 50 | 172 | 202 | 855 | 3A |
321PA30E-66SG-3A | 3000 | 600 | 4,0/500 | 1970 | 100 | 660-2.930 | 1350 | 60x50 | 610 | 1150 | 50 | 172 | 202 | 855 | 3A |
321PA38A-56SG-3A | 3800 | 600 | 4,5/600 | 1470 | 100 | 560-2.230 | 1350 | 60x60 | 510 | 1150 | 60 | 172 | 234 | 800 | 3A |
321PA38B-56SG-3A | 3800 | 600 | 4,5/600 | 1570 | 100 | 560-2.330 | 1350 | 60x60 | 510 | 1150 | 60 | 172 | 232 | 820 | 3A |
321PA38C-56SG-3A | 3800 | 600 | 4,5/600 | 1670 | 100 | 560-2.430 | 1350 | 60x60 | 510 | 1150 | 60 | 172 | 229 | 840 | 3A |
321PA38D-56SG-3A | 3800 | 600 | 4,5/600 | 1770 | 100 | 560-2.530 | 1350 | 60x60 | 510 | 1150 | 60 | 172 | 225 | 860 | 3A |
321PA38E-66SG-3A | 3800 | 600 | 4,5/600 | 1970 | 100 | 660-2.930 | 1350 | 60x60 | 610 | 1150 | 60 | 172 | 216 | 925 | 3A |
321PA38E-56SG-3A | 3800 | 600 | 4,5/600 | 1970 | 100 | 560-2.730 | 1350 | 60x50 | 510 | 1150 | 50 | 172 | 190 | 900 | 3A |
321PA38F-66SG-3A | 3800 | 600 | 4,5/600 | 2170 | 100 | 660- 3.130 | 1350 | 60x60 | 610 | 1000 | 60 | 172 | 190 | 900 | 3A |
Notes:
- Additional hydraulics required: two.
- The unit is equipped with separate sideshift.
- Interchangeable forks for F- and 321PA Series.
- 10 mm offset between inner and outer pair of forks.
- Minimum carriage width of truck: 6-5304F/08F/321PA- 1100 mm.
- For different widths, minimum fork carriage width is on request.
- 1 Fork spread over inner pair of forks 560 mm.
Options:
- Quick disconnect lower hooks ISO 2328 class 2 & 3.
- Automatic lubrication system
- F-Series available for Sideshift and Guiding System
- 321PA available for Sideshifting
- G- Series - Heavy duty brass wear pads on lower sideshift (abrasive ambience, e.g. glass or cement industry).
- Standard fork length 1150 mm, 1000 or 1200 mm without extra cost.
- Alternative forks lengths or sections.
- All forks on equal level.
- Separate sideshift +/- 150 mm.
- Alternative load backrests.
- Single arm control.
- 3/2/1 Pallet Handler with Load Extender.