To choose the correct lift table it is necessary to know the kind of work the table is supposed to do.
Wide Capacity of accessories to meet the safety requirements for lift tables.
If the lift table is positioned in a pit, it is necessary to provide construction work for placement.
The drawing refers to a standard lift table without options. Please consult Bolzoni Group for correct pit drawing.
A = Top platform length
B = Top platform width
E = Stroke
H = Collapsed height
|Angle iron pit edge protection (60x60x6)
|Rainwater drainage located in the pit center 100 mm dia.
|Tube for incoming hoses 100 mm dia.
|The lower frames of the standard tables are not self supporting. It is therefore important that the pit base is well levelled.
|It is necessary that the bottom of the pit is well drained, when necessary, providing that the rainwater drainage hole is at 80 mm lower than H.
|Output electric / hydraulic cables always from fixed side F-Y.