Models 6-54 (Sideshifting)
6-5404G | 1100 | 1200 | 2,5/600 | 1200 | 100 | 550-1.930 | 1350 | 80x50 | 540 | 2350 | 50 | 192 | 550 | 665 | 2 A |
6-5405G | 1300 | 1200 | 3,0/500 | 1200 | 100 | 550-1.930 | 1350 | 80x50 | 540 | 2350 | 50 | 172 | 530 | 700 | 3 A |
6-5405F | 1600 | 1200 | 4,0/500 | 1.200 | 100 | 550-1.930 | 1350 | 80x60/80x50 | 550 | 2350 | 60 | 157 | 620 | 816 | 3 A |
6-5406F | 2800 | 1200 | 5,0/600 | 1310 | 100 | 540-1.920 | 1350 | 80x70/80x60 | 540 | 2350 | 70 | 184 | 530 | 998 | 3 A |
6-5406F | 2800 | 1200 | 5,0/600 | 1410 | 150 | 540-2.020 | 1350 | 80x70/80x60 | 540 | 2350 | 70 | 184 | 530 | 1008 | 3 A |
6-5407F | 3000 | 1200 | 5,0/600 | 1410 | 100 | 540-2.020 | 1350 | 80x70/80x60 | 540 | 2350 | 70 | 184 | 505 | 1075 | 4 A |
6-5408N | 3500 | 1200 | 7,0/600 | 1420 | 160 | 560-1.960 | 1350 | 80x60/90x55 | 560 | 2350 | 70 | 222 | 435 | 1325 | 4 A |
6-5409N | 4500 | 1200 | 8,0/600 | 1420 | 160 | 560-1.960 | 1350 | 80x70/100x60 | 560 | 2350 | 70 | 222 | 460 | 1380 | 4 A |
6-5410N | 5600 | 1200 | 8,0/900 | 1420 | 160 | 560-1.960 | 1350 | 80x75/100x70 | 560 | 2350 | 80 | 244 | 490 | 1520 | 4 A |
Notes:
- Additional hydraulics required: two.
- 6-5404G/05G/06F/07F internal separate sideshift; 6 5408N/09N/10N with bolt-on sideshift.
- Types 6-5404/05 “a”/06/07F with interchangeable forks.
- 10 mm offset between inner and outer forks.
- Minimum required carriage width at forklift: 6-5404G/05G 980 mm; 6-5406F/07F 1100 mm; 6-5408N/09N/10N 1500 mm (160 mm SS); 1350 mm (100 mm SS).
Options:
- Automatic lubrication system
- (F and G Series).
- Automatic lubrication system for
- Sideshifter (for N- Series).
- G-Series: Heavy duty brass wear pads on upper sideshift (abrasive ambience, e.g. glass or cement industry).
- Fork length 2400 mm without extra cost.
- Alternative forks lengths or sections.
- All forks on equal level.
- Alternative load backrests.
- Sideshift +/- 150 mm.
- Single arm control.